We use them everyday but we don’t often think about what goes into designing and crafting a sink or a bathtub. They just seem to magically appear in bathrooms everywhere without us knowing how they came to be. Renowned designer Konstantin Grcic teamed up with Swiss company LAUFEN on the VAL bathroom collection that features simple architectural lines with incredibly thin walls, made from LAUFEN’s game-changing material SaphirKeramik. Take a look as LAUFEN and Grcic give us some insight into how the pieces take shape, in this month’s Deconstruction.
The first step in the ceramic casting process is to fill the plaster mould with the liquid ceramic mass, called slip.
The level of complexity of a piece also determines the amount of manual work which still goes into it. Even well-established, less complicated products still need some manual work.
Surfaces need to be sanded and evenly smoothed before glazing.
Dust from the sanding must be removed before actually glazing the product.
Prototype products are glazed by hand, whereas production products are glazed inside and out by robots.
The finished product has gone through a 22-hour firing process, going up to 1250°C, liquifying and then solidifying and hardening the glaze, leaving the product with the typical glossy, hygienic and scratch, chemical and abrasion resistant surface we all know from ceramic sanitaryware.
Left to right: Konstantin Grcic, Dominic Lutyens, Alain Reymond Design and Product Manager, Laufen Bathrooms AG, and Marc Viardot Director Marketing and Products, Laufen Bathrooms AG
Konstantin Grcic and Charlotte Talbot inspecting pieces.
Thanks to the slim rim and thin walls, the bowl of the washbasin from the Val collection appears particularly generous.
The oval bathtub from the Val bathroom collection appears light and elegant, and thanks to an extremely slim rim harmonises perfectly with the filigree washbasins in the series.
To match the SaphirKeramik objects Konstantin Grcic has designed a freestanding bathtub with a slim rim.